Black Weeks: Save up to 60% off many products! (Valid until 30.11.)!
The high-performance Oxime silicone sealant is the most suitable sealing compound for all who plan their floor down to the last detail. The special feature of this sealant over other products is the sheer choice of colours on offer, making it easy to adapt to your specific flooring. For example, do you have a Forbo linoleum floor and want to match the seams to the unique flooring colours? No problem! This neutral silicone sealant can be ordered and tailored to your application, in addition to the countless colours readily available in cartridge form. Besides the many exotic and unusual colours, the more traditional shades of grey and black silicone sealant are also available. This silicone product convinces not only with its customisation options but also with its high-quality properties!
The sealant is ideally suited for the different types of seams that occur when installing common floor coverings, such as laminate, ceramic, LVT or linoleum. The seams between prefabricated concrete and masonry can also be sealed with this versatile filling compound. In addition to these, you can use Havocolour for facade joints, glass seals and various applications in sanitary areas. For highly absorbent surfaces a pre-treatment with a suitable primer is recommended to ensure a better seal. An adhesion test should be carried out before using the sealing agent.
This floor sealer has good mechanical resistance to the tests of everyday life. Providing resistance to grease, oil and various chemicals, UV light, weather and even occasional exposure to saltwater. What’s more, the sealant also does not dissolve when exposed to water, moisture or chlorine. The permanently elastic silicone is also oxime neutral. This makes it almost odourless, making it particularly suitable for home and indoor applications.
In order to fill seams as consistently as possible, the subsoil must be free from dust, dirt and grease. Cut open the cartridge at the thread and insert the nozzle. Then simply insert the whole assembly into a suitable cartridge gun and you can start filling your seams. Gently finish the seams with a spatula or putty knife, and after about five minutes you can observe a protective film forming on the surface of the material, as the sealant is starting to dry. Please refer to the manufacturer's technical data sheet for instructions on the use, storage, safety and exact application of the product.
Choose from this high-quality Oxime silicone sealant in every colour imaginable and enjoy a high standard of quality and optimal individualisation! For any questions or queries regarding your order, please do not hesitate to contact our expert service! Get in touch via email, telephone, or complete our contact form and we will be happy to assist you!